Menü Schließen

Wasserfilterventile. Hersteller: Clack Corporation

CERTIFIED TO
NSF/ANSI 44
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
IP54
IP55 with Weather Cover

All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.

COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines.
WS1 Spec Sheet

 

FEATURES AND BENEFITS

  • Solid state microprocessor with easy access front panel settings
  • Three modes of operation: meter immediate, meter delayed, or time clock delayed
  • Double backwash feature offers optimum regeneration, cleaning ability, and efficiency
  • Capable of 36 pre-programmed regeneration cycles based on control valve setting
  • Days override feature: 1 – 28 days available
  • Backwash and brining ability to 21” diameter tanks
  • Downflow/upflow regeneration
  • Stores system configuration and operation data in nonvolatile memory
  • Coin Cell Lithium battery back-up with an 8-hour carryover
  • Level VI 15-volt output DC power supply provides safe and easy installation
  • Control valve design provides optimum service and backwash rates
  • Pre or post-treated water regenerant refill
  • Reliable and proven DC drive
  • One-piece expanding seal spacer stack assembly
  • Linearly reciprocating piston operation

ZERTIFIZIERT NACH
NSF/ANSI 44, NSF/ANSI/CAN 61 und 372.

Alle Clack-Steuerventile werden in Wisconsin, USA, entwickelt, montiert sowie luft- und wassergetestet.

KOMPATIBEL MIT DEN FOLGENDEN TYPISCHEN KONZENTRATIONEN VON REGENERATIONSMITTELN ODER CHEMIKALIEN
Natriumchlorid, Kaliumchlorid, Kaliumpermanganat, Natriumbisulfit, Chlor und Chloramine.

WS1EE Twin Alternierendes Steuerventil – Technisches Datenblatt

MERKMALE UND VORTEILE

  • Betriebsdurchfluss 28 gpm, Rückspüldurchfluss 15 gpm bei installiertem Zähler und Bypass

  • Festkörper-Mikroprozessor mit leicht zugänglichen Einstellungen über das Frontpanel

  • Frontdisplay zur Anzeige von Uhrzeit, Tagen bis zur nächsten Regeneration, verbleibendem Volumen, aktuellem Durchfluss und Gesamtverbrauch (Totalisator) sowie Anzeige des aktiven Tanks

  • Vier Möglichkeiten zur Auslösung der Regeneration: volumenabhängig sofort, volumenabhängig verzögert, zeitgesteuert verzögert oder über Differenzdruck

  • Optionale doppelte Rückspülung für optimale Regeneration, Reinigungsleistung und Effizienz

  • Einstellbare Zykluszeiten mit 6-Zyklus-Steuerung: kontrollierte Rückspülung, Abwärtsbesalzung / langsame Spülung, zweite Rückspülung, Schnellspülung, Nachfüllung und Abwärtsbetrieb

  • Lithium-Knopfzellen-Batteriepufferung mit 8 Stunden Überbrückungszeit

  • Rückspül- und Besalzungsfunktion für Behälter bis zu 21″ Durchmesser

  • Regeneration mit Abwärts- oder Aufwärtsbesalzung

  • Level-VI-DC-Netzteil mit 15 Volt Ausgang für sichere und einfache Installation

  • Nachfüllung und Regenerationszyklen mit aufbereitetem / enthärtetem Wasser

  • Zuverlässige und bewährte DC-Antriebe

  • Einteilige, expandierende Dichtungs- und Distanzring-Baugruppe

  • Linear hin- und herbewegter Kolbenbetrieb

CERTIFIED TO
NSF/ANSI 44
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
IP54
IP55 with Weather Cover

COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines


WS1.25 Control Valve Spec Sheet

 

FEATURES AND BENEFITS

  • Solid state microprocessor with easy access front panel settings
  • Three modes of operation: meter immediate, meter delayed, or time clock delayed
  • Double backwash feature offers optimum regeneration, cleaning ability, and efficiency
  • Capable of 36 pre-programmed regeneration cycles based on control valve setting
  • Days override feature: 1 – 28 days available
  • Backwash and brining ability to 21” diameter tanks
  • Downflow regeneration
  • Stores system configuration and operation data in nonvolatile memory
  • Coin Cell Lithium battery back-up with an 8-hour carryover
  • Level VI 15-volt output DC power supply provides safe and easy installation
  • Patented one-piece expanding seal spacer stack assembly
  • Patented linearly reciprocating piston operation
  • Control valve design provides optimum service and backwash rates
  • Pre or post-treated water regenerant refill
  • Reliable and proven DC drive

CERTIFIED TO
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372

 

All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.

 

COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS1.5 Control Valve Spec Sheet

 

FEATURES AND BENEFITS

  • 1.5″ top-mount control valve suited for mid-size commercial/industrial applications

  • Epoxy-coated lead-free brass valve body 

  • Economical stainless steel optional meter assembly 

  • Service flow rate of 70 gpm, backwash 52 gpm 

  • Solid state microprocessor with easy access front panel settings 

  • Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer) 

  • Four methods to initiate regeneration: meter immediate, meter delayed, time clock delayed or pressure differential 

  • Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency 

  • Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service 

  • Coin Cell Lithium battery back-up with an 8-hour carryover 

  • Level VI 15-volt output DC power supply provides safe and easy installation 

  • Post-treated water regenerant refill 

  • One-piece expanding seal spacer stack assembly 

  • Linearly reciprocating piston operation 

  • Reliable and proven DC drive 

CERTIFIED TO

NSF/ANSI 44, NSF/ANSI/CAN 61 and 372.

All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.

COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines

WS2 Control Valve Spec Sheet

FEATURES AND BENEFITS

  • 2” Top mount control valve suited for commercial/industrial applications
  • Epoxy-coated lead-free brass valve body
  • Economical stainless steel optional meter assembly
  • Service flow rate of 115 gpm, backwash 80 gpm
  • Solid state microprocessor with easy access front panel settings
  • Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
  • Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
  •  Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
  • Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service
  • Coin Cell Lithium battery back-up with an 8-hour carryover
  • Level VI 15-volt output DC power supply provides safe and easy installation
  • Post-treated water regenerant refill
  • Reliable and proven DC drive
  • One-piece expanding seal spacer stack assembly
  • Linearly reciprocating piston operation

CERTIFIED TO
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372

All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.

COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS3 Control Valve Spec Sheet

FEATURES AND BENEFITS

  • Control Valve Flow Rates: Service 250 gpm (946 lpm) (56.8 m3/h) Backwash 220 gpm (833 lpm) (50.0 m3/h)
  • Epoxy-coated lead-free brass valve body
  • Fully programmable regeneration cycle times and sequences (maximum 9)
  • Network up to 16 valves using Cat5 cable or better
  • Methods to initiate regeneration: Meter Delayed, Meter Immediate, Time Clock Delay, Remote Input
  • Add up to 2 relay expansion boards to the circuit board (sold separately)
  • Top-mount or side-mount capabilities for commercial and industrial applications
  • Programmable System types: Alternating, Progressive Flow, Series, Single
  • Days override feature; 1-28 days or day/s of the week
  • Blue backlight front display shows: Time and Date, Current Flow Rate, Volume Used, Volume Remaining, Days Remaining
  • Diagnostics and history viewing
  • Modbus RS485 duplex to communicate with building automation systems
  • Remote circuit board software update capability
  • Reliable and proven DC drive
  • One-piece expanding seal spacer stack assembly