Water filter valves. Manufacturer: Clack Corporation
CERTIFIED TO
NSF/ANSI 44
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
IP54
IP55 with Weather Cover
All Clack control valves are designed, assembled, air-tested, and water-tested in Wisconsin, USA.
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATIONS OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine, and chloramines.
WS1 Spec Sheet
FEATURES AND BENEFITS
Solid-state microprocessor with easy-access front panel settings.
Three modes of operation: meter immediate, meter delayed, or time clock delayed.
Double backwash feature provides optimal regeneration, cleaning performance, and efficiency.
Capable of 36 pre-programmed regeneration cycles based on control valve settings.
Days override feature: 1–28 days available.
Backwash and brining capability for tanks up to 21” diameter.
Downflow / upflow regeneration.
Stores system configuration and operation data in non-volatile memory.
Coin cell lithium battery backup with up to 8-hour carryover.
Level VI 15-volt DC power supply for safe and easy installation.
Control valve design ensures optimal service and backwash flow rates.
Pre- or post-treated water regenerant refill.
Reliable and proven DC drive.
One-piece expanding seal and spacer stack assembly.
Linearly reciprocating piston operation.
CERTIFIED TO
NSF/ANSI 44, NSF/ANSI/CAN 61 and 372.
All Clack control valves are designed, assembled, and air- and water-tested in Wisconsin, USA.
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATIONS OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine, and chloramines.
WS1EE Twin Alternating Control Valve – Technical Data Sheet
FEATURES AND BENEFITS
Operating flow rate 28 gpm, backwash flow rate 15 gpm with meter and bypass installed.
Solid-state microprocessor with easy access front panel settings.
Front display shows time of day, days to next regeneration, remaining volume, current flow rate, total consumption (totalizer), and active tank indication.
Four regeneration trigger options: meter immediate, meter delayed, time clock delayed, or differential pressure.
Optional double backwash for optimal regeneration, cleaning performance, and efficiency.
Adjustable cycle times with 6-cycle control: controlled backwash, downflow brining / slow rinse, second backwash, fast rinse, refill, and downflow service.
Lithium coin cell battery backup with up to 8-hour carryover.
Backwash and brining capability for tanks up to 21″ diameter.
Regeneration with downflow or upflow brining.
Level VI DC power supply with 15-volt output for safe and easy installation.
Refill and regeneration cycles using treated / softened water.
Reliable and proven DC drive.
One-piece expanding seal and spacer stack assembly.
Linearly reciprocating piston operation.
CERTIFIED TO
NSF/ANSI 44
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
IP54
IP55 with Weather Cover
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS1.25 Control Valve Spec Sheet
FEATURES AND BENEFITS
- Solid state microprocessor with easy access front panel settings
- Three modes of operation: meter immediate, meter delayed, or time clock delayed
- Double backwash feature offers optimum regeneration, cleaning ability, and efficiency
- Capable of 36 pre-programmed regeneration cycles based on control valve setting
- Days override feature: 1 – 28 days available
- Backwash and brining ability to 21” diameter tanks
- Downflow regeneration
- Stores system configuration and operation data in nonvolatile memory
- Coin Cell Lithium battery back-up with an 8-hour carryover
- Level VI 15-volt output DC power supply provides safe and easy installation
- Patented one-piece expanding seal spacer stack assembly
- Patented linearly reciprocating piston operation
- Control valve design provides optimum service and backwash rates
- Pre or post-treated water regenerant refill
- Reliable and proven DC drive
CERTIFIED TO
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS1.5 Control Valve Spec Sheet
FEATURES AND BENEFITS
1.5″ top-mount control valve suited for mid-size commercial/industrial applications
Epoxy-coated lead-free brass valve body
Economical stainless steel optional meter assembly
Service flow rate of 70 gpm, backwash 52 gpm
Solid state microprocessor with easy access front panel settings
Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
Four methods to initiate regeneration: meter immediate, meter delayed, time clock delayed or pressure differential
Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service
Coin Cell Lithium battery back-up with an 8-hour carryover
Level VI 15-volt output DC power supply provides safe and easy installation
Post-treated water regenerant refill
One-piece expanding seal spacer stack assembly
Linearly reciprocating piston operation
Reliable and proven DC drive
CERTIFIED TO
NSF/ANSI 44, NSF/ANSI/CAN 61 and 372.
All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS2 Control Valve Spec Sheet
FEATURES AND BENEFITS
- 2” Top mount control valve suited for commercial/industrial applications
- Epoxy-coated lead-free brass valve body
- Economical stainless steel optional meter assembly
- Service flow rate of 115 gpm, backwash 80 gpm
- Solid state microprocessor with easy access front panel settings
- Front panel display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (Totalizer)
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Optional double backwash feature offers optimum regeneration, cleaning ability and efficiency
- Fully adjustable cycle times with 6-cycle control delivers controlled backwash, downflow brining or upflow brining, slow rinse, second backwash, fast rinse, refill and downflow service
- Coin Cell Lithium battery back-up with an 8-hour carryover
- Level VI 15-volt output DC power supply provides safe and easy installation
- Post-treated water regenerant refill
- Reliable and proven DC drive
- One-piece expanding seal spacer stack assembly
- Linearly reciprocating piston operation
CERTIFIED TO
NSF/ANSI/CAN 61
NSF/ANSI/CAN 372
All Clack Control Valves are designed, assembled, air tested, and water tested in Wisconsin, USA.
COMPATIBLE WITH THE FOLLOWING TYPICAL CONCENTRATION OF REGENERANTS OR CHEMICALS
Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
WS3 Control Valve Spec Sheet
FEATURES AND BENEFITS
- Control Valve Flow Rates: Service 250 gpm (946 lpm) (56.8 m3/h) Backwash 220 gpm (833 lpm) (50.0 m3/h)
- Epoxy-coated lead-free brass valve body
- Fully programmable regeneration cycle times and sequences (maximum 9)
- Network up to 16 valves using Cat5 cable or better
- Methods to initiate regeneration: Meter Delayed, Meter Immediate, Time Clock Delay, Remote Input
- Add up to 2 relay expansion boards to the circuit board (sold separately)
- Top-mount or side-mount capabilities for commercial and industrial applications
- Programmable System types: Alternating, Progressive Flow, Series, Single
- Days override feature; 1-28 days or day/s of the week
- Blue backlight front display shows: Time and Date, Current Flow Rate, Volume Used, Volume Remaining, Days Remaining
- Diagnostics and history viewing
- Modbus RS485 duplex to communicate with building automation systems
- Remote circuit board software update capability
- Reliable and proven DC drive
- One-piece expanding seal spacer stack assembly